Welcome to 51coating.com, Guest

LED K-5312T pcb clear acrylic coating pcb protective coating thermal insulation ceramic coating

LED K-5312T pcb clear acrylic coating pcb protective coating thermal insulation ceramic coating

  • FOB Price:
  • US 8.00-15.00 /Pair Get Latest Price
  • Order Quantity:
  • 10-1000 /Pair Get Latest Price
  • Business:
  • Shadowless Adhesive,Silicone Rubber,Red Gasket Maker,Full Transparent AB Glue,Instant Glue
  • Export:
  • 11% - 20%
  • Volume:
  • US$1 Million - US$2.5 Million
  • Address:
  • Dutian Industrial Zone, Gonglian, Longfeng, Huizhou, Guangdong, China (Mainland)

Product Detail

Quick Details
  • Place Of Origin:guangdong China (mainland)
  • Classification:double Components Adhesives
  • Main Raw Material:silicone
  • Usage:construction,transportation
  • Brand Name:kafuter
  • Model Number:5312t
  • Appearance:
  • Mix Ratio(by Weight):

People who shopped for this item also looked at

  • Price
  • Place Of Origin
  • Model Number
  • Min Order
  • Brand Name
  • Usage
  • Main Raw Material
  • Mix Ratio(by Weight)
  • Classification
  • Appearance
  • protective epdm clear acrylic coating

    protective epdm clear acrylic coating

  • US 3.60-7.00
  • guangdong China (mainland)
  • protective Epdm Clear Acrylic Coating
  • 50
  • tianrui
  • appliance Paint,boat Paint,building Coating,car Paint,electrical Insulating Varnish,furniture Paint,paper Coating,plastic Coating,road Marking Paint,rubber Coating,wood Paint,metal Paint
  • acrylic

    LED K-5312T pcb clear acrylic coating pcb protective coating thermal insulation ceramic coating

 

Features:

 1) K-5312T is two-component, room cure silicone encapsulant.

 2) It become transparent elastomer after cured, water and moisture proof, good transparency, and yellow resistance.

3) Apply in deep-section potting and fixing in 6mm~2cm.

4) Good adhesion to metals and mostly plastics(epoxy resin, polycarbonate, nitrile rubber, epdm)

 

 

APPLICATION:

 

Encapsulating and potting inLED module, general electronic components, PCB board, and beads in LED strip lights, led rigid bar light, etc.

 

 

PROPERTIES

 

                                Item

K-5312T(Transparent)

 

 

 

 

Uncured

Appearance

A: Clear transparent liquid

B: Clear transparent liquid

Viscosity(25°C, mpa.s)

A: 1000~2000

B: 5~10

Density (25°C, g/cm3)

1.10~1.05

Mix Ratio(by weight)

A:B=100:10

Controllable Time (25°C,min)

60~90

Mixed Viscosity(25°C, mpa.s)

1000~2500

Initial Curing Time(25°C,h)

   5~6

Full Curing Time (25°C,h)

24

 

 

 

Cured

 

(Shore A) Hardness(24h)

15~25

Shear strength(mpa)

≥0.5

Thermal Conductivity(w/(m.k))

0.15

Volume Resistivity(Ω.cm)

1.0×1015

Dielectric Strength(kv/mm-1)

≥20

Permittivity(100KHZ)

   2.9

Dissipation Factor(100KHZ)

1.0~ 3.0×10-3

 

 Directions:

 

 

1. Measurement 

 

Fully mix component A before using, accurately weighing A part, and then put the Part B to mix with Par A by mix ratio. It can adjust by your own needs according to the specification.

 

2. Mixing

 

Put Part B in the bottle with Part A, evenly mix them immediately. And should tighten-sealed the Part B after using.

 

 3. Pouring

 

Put the mixed glue evenly into the product which need encapsulate immediately. 

 

4. Curing

 

The encapsulated components can be room cured, and it can put into next process after 10 to 24 hours full cure. 

 

 

 

Not exactly what you want? 1 request,multiple quotations Get Quotations Now >>
Company Details
company proudcts

this is part of the Architectural Coating for sale